612.467.9367
comodo

Custom Shop

Use this page to design your custom body.  It's very easy.  Simply select from each of the categories what you want and email it to us.  If you don't see exactly what you want, please email us with your specifications.  We can generally produce a quote in one business day.

PRICING:  
This is GENERAL guideline just to give a ballpark cost.  The BASE cost for a custom body is $129.00  This is your starting point, then add any additional costs from the list below.  Again, this will result in a BALLPARK figure and yo MUST get a written quote from us to proceed.

For example:  Let's say you wanted Telecaster type body (Base $129) made out of Maple (+$10) with a Flamed Maple veneer(+$15), standard Telecaster neck pocket (+$0), with a humbucker in the bridge position (+$0), with a standard Tele control cavity (+$0), with a forearm relief cut (+$0) and a Belly cut (+ $20).  Your BALLPARK total would be $174.00

CUSTOM BODY ORDER FORM:

1.  BASE COST:   $129    (For Left Hand add $20 )

2.  BODY WOOD
     Maple  + $0
     Alder  + $15
     Ash  + $20 
     Single Piece of Ash (if available)  + $60
     Mahogany  + $30 

3.  VENEER TYPE:
     None  + $0
     Mappa Burl  + $15
     Flame Bookmatched  + $15
     Highly Quilted Bookmatched  + $20
     Ambrosia Spalted Maple  + $15
     Spalted Chen + 20
     Walnut Burl  + $30

4.  BODY SHAPE:
     Telecaster Type  + $0
     Stratocaster Type  + $0
     Super-Strat Type  + $10
     Jazzmaster Type  + $20
     Strandberg (headless) Type + $20
     Les Paul Type (non-arch top) + $20
     Firebird Type + $30
     P Bass Type  + $30
     MusicMan Axis Type  +$20
     Kelly Type + $30

5.  NECK POCKET:
     Standard Telecaster  + $0
     Standard Stratocaster  + $0

6.  BRIDGE PICKUP CAVITY:
     None
     Standard Telecaster bridge
     Standard Humbucker
     Standard P90
     Standard Single Coil
     
7.  MIDDLE PICKUP CAVITY:  + $20

     None
     Standard Telecaster bridge
     Standard Humbucker
     Standard P90
     Standard Single Coil
     

8.  NECK PICKUP CAVITY:
     None
     Standard Telecaster bridge
     Standard Humbucker
     Standard P90
     Standard Single Coil
     

9.  CONTROL CAVITY:
     None
     Standard Telecaster
     Standard Stratocaster (use this for the standard
                 Top route Strat for use with a pickguard)
     Standard Supra-Tone rear routed control cavity + $30  (includes rear cover)

10.  BRIDGE ROUTE:
     None
     Telecaster:  Standard holes for string thru  (Note: These holes are drilled from the top 7.69" back from the rear of the
        neck pocket, .096" diameter, .125" deep (they do not go thru), and spaced 2.125" )
     Stratocaster:  Standard tremolo + $20 (without holes)
     Floyd Rose:  Standard inset Floyd Rose  with spring cavity in on teh back + $70 (no stud holes)
  

11.  FRONT CONTOUR:
     None
     Forearm Relief Cut  + $20 - Not available with Thinline
     Supra-fit lower horn contour  + $20

12.  REAR CONTOUR:
     None
     Belly Cut  + $20 - Not available with Thinline
 

13.  ADD FOR LEFT HANDED + $40

14.  Add for Toggle switch in upper or lower horn + $30

15.  Add stencil (from stock) +$20

16.  Add for THINLINE type with Ash top  (single F hole with standard control route)  + $50
17.  Add for THINLINE type with Mahogany top (single F hole with standard control route)  + $60

 

We do not drill any control holes or tremolo stud or mount holes.  Standard edge round over unless otherwise noted.  Shipping to the lower 48 is usually about $16.  We will need the address you wish to ship to in order to compute shipping cost.

You can compute the approximate cost yourself, or, simply email us the answers to all the enumerated items above and we'll compute it for you.  Please use the exact words listed as choices for each emunerated item. PLEASE NOTE: IF YOU DON;T WANT A FEATURE, SAY A MIDDLE PICKUP CAVITY, PLEASE PUT "NONE" AFTER THE ENUMERATED ITEM. For example, your email to us might look like the following:  (Feel free to "Cut and Paste" the following then change the configuration to what you want, and email to us)

1.  BASE - $129  

2.  Body Wood - Ash

3.  Veneer Type - Flamed

4.  Body Shape - Telecaster

5.  Neck pocket - Strat

6.  Bridge pickup cavity - Humbucker

7.  Middle Pickup Cavity - NONE

8.  Neck pickup cavity - SIngle coil

9.  Control Cavity - Standard Tele

10.  Bridge Route - NONE

11.  Front Contour - Forearm relief

12.  Rear Contour - Belly Cut

13.  Standard Right hand 

14.  Toggle switch route:  NONE

15.  Stencil:  NONE

16.  Thinline with ash top: NONE

17.  Thinline with mahogany top:  NONE