Telecaster Style Body
Custom crafted by an experienced luthier right here in the USA. NOTHING, no part of this body is outsourced,
it is entirely made in-house using sustainable hardwoods.
The body pictured is a stock photo and the body you receive may vary in color, grain, etc.. The body has been wiped with naphtha before the
pictures to better show the figure and grain. I am sorry but we do not accept offers, trades, etc.
DESCRIPTION:
BODY: Solid Basswood
THICKNESS: 1.750”
WEIGHT: Average 4.6 lbs - 5.3 lbs
NECK ROUTE: 2 3/16” wide, 5/8” deep, standard Telecaster
PICKUP ROUTE: Standard P90 x2 ( 1.370" x 3.360", .750" Deep)
CONTROL ROUTE: Standard Telecaster top route
Solid body with spectacular veneer. Check out the pictures!
This body is sanded to 120 grit only. Additional filling, sanding, and finishing will be required.
Solid wood body with veneer applied to the top. We use standard veneers that are .025" thick. Pickup routes
are .750" deep, control cavity route is 1.500" deep, the .096" diameter holes for the neck and bridge are 1.500" deep
and do not go all the way through. We do this intentionally so that if you wish to use a top mount bridge or a different
neck plate you will not see the unused holes on the back of the guitar. If you do wish to use a standard bridge and/or
neck plate it is simply a matter of drilling the holes through. All that is required is a drill and less than one minute.
This body is NOT Made in China. It is made in St. Paul, MN USA by Veterans.
This body is NOT made of plywood, Lindenwood, or some wood you can’t pronounce.
This body is NOT made by hourly employees, it is made by an experience luthier.
NECK FITMENT: Necks can and do vary in dimension. Our neck pockets are made to the original USA print
but you should expect some minor fitting.
Supra-Tone is a 100% veteran owned company and we ship everyday from St. Paul, MN USA.
Telecaster Style Bodies